Product Security Policies - Epson SureColor F-Series Network Manual

Product Security Policies

Start the product Remote Manager from your computer, open the Setup tab, and adjust
Security > IPsec/Access Control settings for security policies that match how the product
will be used.
Note:
We recommend that the product be assigned a static IP address for secure access using IPsec or
Access Control. Settings will be invalidated if the IP address changes.
Sample 1
Open the Setup tab in Remote Manager and configure Security > IPsec/Access Control
> Default Policy settings as follows:
Option
IPsec/Access Control
Default Policy > Access Control
Pre-Shared Key
Sample 2
Open the Setup tab in Remote Manager and configure Security > IPsec/Access Control
> Group Policy settings for each client.
Refusing Access from Unauthorized Clients
Open the Setup tab in Remote Manager and configure Security > IPsec/Access Control
> Default Policy settings as follows:
Option
IPsec/Access Control
Default Policy > Access Control
Print Client Settings
Separate IPsec/Access Control > Group Policy settings must be created for each of the
Service Name > RAW (Port 9100), ENPC,
below. Group policies are applied in order from Group Policy 1.
Setting
Enable
Use IPsec
Enter a key (maximum 127
alphanumeric characters)
Setting
Enable
Access Refuse
1
and SNMP options as shown in the example
Tips for Administrator
53