Accessing The Epsonnet Config User's Guide; Epsonnet Config For Mac Os; About Epsonnet Config; System Requirements - Epson SureColor F-Series Network Manual

If you add or delete protocols or services from your operating system after installing EpsonNet
O
Config, EpsonNet Config may not work correctly. If this happens, uninstall EpsonNet Config
and then install it again.
If the Windows Security Alert window appears after you start EpsonNet Config, click the Allow
O
access or Unblock button; otherwise the devices are not listed on the screen of EpsonNet
Config.

Accessing the EpsonNet Config User's Guide

The EpsonNet Config User's Guide contains detailed information on EpsonNet Config.
Follow the steps below to access the EpsonNet Config User's Guide.
1. Click Start, point to All Programs, select EpsonNet, and then select EpsonNet
Config V3.
2. Click EpsonNet Config User's Guide.
The EpsonNet Config User's Guide appears. By clicking the links on the front page or
contents page, you can get information on using EpsonNet Config.

EpsonNet Config for Mac OS

About EpsonNet Config

EpsonNet Config for Mac OS is a OS X-based configuration software for administrators to
configure the network interface for TCP/IP.
Note:
Be sure to use the EpsonNet Config included on the Software Disc shipped with this product.

System Requirements

The following table lists the system requirements of EpsonNet Config.
Operating systems
Hard disk drive space
OS X 10.5 or later
30 MB
32
Network Software