Table of Contents
Advertisement
Introduction
About Your Printer
Your printer has a built-in Ethernet interface and can connect anywhere on your network
using 10Base-T, 100Base-TX, and 1000Base-T Ethernet. The built-in Ethernet interface,
which is called the network interface in this manual, automatically selects the correct
standard when it connects to a network. In addition, it automatically selects appropriate
network protocols.
Because the network interface supports multiple protocols and automatically detects
protocols on your network, you can print from Microsoft
applications.
Use the Software Disc to easily configure the network interface for use on the TCP/IP
network and install the printer driver. You can use the printer on the TCP/IP network at
once.
If you want to configure the network interface for protocols such as TCP/IP, WSD, LLTD,
UPnP, Bonjour, and SNMP, use EpsonNet Config, the configuration utility provided with
your product, to quickly and easily configure the network interface to use those protocols.
Note:
The EpsonNet Config utility configures the network interface to work only with protocols that exist
on your network. This does not imply that you can use all of the above-mentioned protocols on your
network or operating system. The protocols that the network interface can use may vary depending
on the operating system and the network configuration.
About This Guide
This Network Guide contains information about using the network interface on a network.
It includes how to set up the network interface, install the configuration software, and
modify network settings of your printer and computers.
For information about your printer, see your User's Guide.
Note:
To read the guide, you must have Adobe Reader or Adobe Acrobat Reader installed on your
O
computer.
This guide is written for network administrators, and many of the steps included here require
O
detailed network knowledge and administrator rights.
®
®
Windows
and OS X
®
8
Introduction
Advertisement
Table of Contents
