Epson SureColor F-Series Network Manual page 43

5. Confirm the information about the printer's port you want to configure, and then click
Finish.
Items
The port Information
Finish button
Back button
Cancel button
The new printer port is created in your computer. To install the printer driver, see
"Installing the Printer Driver" on page 43.
Installing the Printer Driver
Install the printer driver that comes with your printer.
Note:
Some buttons in these steps may be slightly different depending on your operating system.
1. Insert the Software Disc shipped with the printer.
2. Close the installer screen if it appears.
3. On the Add Printer screen, click the Have Disk button. The Install From Disk dialog box
appears.
4. Click Browse.
Explanations
The following items are displayed:
- Port Name
- Host Name or IP Address
- Protocol
Register the port information to the system and close the Add
EpsonNet Print Port Wizard.
Go back to the printer list window.
Close the Add EpsonNet Print Port Wizard.
43
Network Software