Opening Screen; Remote Manager; About Remote Manager - Epson SureColor F-Series Network Manual

10. Select Enable for Register Network Interface Address to DNS Server if you want to
register the host name and domain name to the DNS server through the DHCP server
that supports Dynamic DNS.
If you want to register the host name and the domain name directly to the DNS server,
select Enable for Register Network Interface Address Directly to DNS Server.
11. OS X only:
Select Enable or Disable for Use Bonjour. If you select Enable, enter the Bonjour
Name and Bonjour Printer Name.
12. Do not exit the Web browser and do not send a job to the printer until after you follow
the on-screen instructions to reset the printer.
Note:
Since the new IP address becomes available after the printer is reset, you need to restart
O
EpsonNet Config by entering the new IP address.
Only changes on the page where you press the Transmit button take effect.
O

Opening Screen

Any user can access the opening screen by typing the IP address of the network interface
into the address bar of your browser.
Note:
The item appears only if your printer supports the function, and the name of the item may vary
O
depending on the model.
See the EpsonNet Config with Web Browser help for details about each item.
O

Remote Manager

About Remote Manager

Remote Manager is a Web-based utility designed to configure the printer for use on a
network.
By typing the IP address of the network interface into the address bar in your browser, you
can start Remote Manager which allows you to configure the network interface for TCP/IP
and SNMP.
36
Network Software