Table of Contents
Advertisement
Disadvantages
You need to set up TCP/IP.
O
Installing Components on Your Computer
About Installing Components on Your Computer
Before configuring the network interface and printing from the computer, you need to install
the necessary components (such as TCP/IP) and assign an IP address and subnet mask
for your computer, depending on the printing method you want to use. See the section in
this chapter appropriate for your operating system.
Note:
The Windows operating system disk may be required during the installation.
O
When using TCP/IP for printing, you need to set the IP address, the subnet mask, and the
O
default gateway of the computer.
Windows 8.x/7/Vista/Server 2012/Server 2008
Use the following procedure to install the necessary components.
1. Open the Control Panel, and then click View network status and tasks or
double-click Network and Sharing Center.
2. Do one of the following:
Windows 8.x/Server 2012: Click Change Adapter Setting, select your network
O
adapter, and then click Change settings of this connection.
Windows 7: Click Local Area Connection and then click the Properties button.
O
Windows Vista/Server 2008: Click View Status and then click the Properties
O
button.
Note:
If the User Account Control screen appears, click the Yes or Continue button.
14
How To
Advertisement
Table of Contents
