Epson SureColor F-Series Network Manual page 55

Option
Group Policy n (n = 1–10)
Access Control
Remote Address (Host)
* A static IP address is recommended. If DHCP or "obtain automatically" (IPv6) is selected, the connection
may terminate when the lease or address expires.
Print Client Settings
Create separate settings for each of the Service Name > RAW (Port 9100), ENPC,
SNMP options using Setup > Security > IPsec/Access Control > Group policy settings
that differ from those used by the administrator. Group policies are applied in order from
Group Policy 1; when setting up policies for both administrators and print clients, order the
list so that the group policies for administrators precede those for print clients.
Note that EpsonNet Config (Windows/Mac OS) will be unable to detect the printer if
separate group policies are not created for the Service Name > ENPC, SNMP options.
Sample settings are shown below.
Option
Group Policy n
(n = 1–10)
Access Control
Remote Address
2
(Host)
Method of Choose
Port
Service Name
1. An Epson protocol used by Epson printer and scanner drivers and such applications as EpsonNet Config
to find the printer.
2. A static IP address is recommended. If DHCP or "obtain automatically" (IPv6) is selected, the connection
may terminate when the lease or address expires.
Note:
Select TCP or UDP for Protocol when Local Port is selected for Method of Choose Port > Port
Number.
Setting
Enable
Access Permission
*
Enter the administrator client IP
address
Setting
RAW (Port 9100)
Enable
Access Permission
Enter the print client IP address (prefix length can be used to specify
range if desired).
Example (IPv4): 192.168.0.0/24
Service Name
RAW (Port 9100)
ENPC
ENPC
1
and
SNMP
SNMP
Tips for Administrator
55