Installing Epsonnet Print - Epson SureColor F-Series Network Manual

Operating systems

Installing EpsonNet Print

You can install EpsonNet Print on your computer from the Software Disc that comes with
your printer. Insert the Software Disc in the CD/DVD drive and select EpsonNet Print on
the Software Select screen.
Follow the steps below to add a port using the Add Printer Wizard.
If you want to add a port for a printer with its IP address assigned automatically by the
O
DHCP server or router, see "Adding a port for a printer assigned with a dynamic IP
address" on page 38.
If you want to add a port for a printer with its IP address assigned manually, see "Adding
O
a port for a printer assigned with a static IP address" on page 41.
Note:
Be sure that the computer is connected to the network and TCP/IP is correctly set.
O
A valid IP address must be assigned to the printer.
O
Adding a port for a printer assigned with a dynamic IP address
1. Windows 8.x/7/Vista/Server 2012/Server 2008: Open the Control Panel, and then
select View devices and printers (Windows 8.x/7/Server 2012) or Printers (Windows
Vista/Server 2008). Click Add a printer to start the Add Printer Wizard.
Windows XP: Click Start and then Printers and Faxes. Under Printer Tasks, click
Add a printer to start the Add Printer Wizard. Click Next.
Windows Server 2003: Click Start and then Printers and Faxes. Double-click Add
Printer to start the Add Printer Wizard. Click Next.
2. Windows 8.x/7/Vista/Server 2012/Server 2008: Click Add a local printer. Select the
Create a new port radio button, and then select EpsonNet Print Port from the list.
Click Next.
Windows 8.x
Windows 7
Windows Vista SP2 or higher
Windows XP Professional/Home Edition (SP3 or higher)
Windows Server 2012
Windows Server 2008 (SP2 or higher)
Windows Server 2008 R2
Windows Server 2003 (SP2 or higher)
38
Network Software