Tips For Administrator; Setting An Ip Address On The Printer's Control Panel - Epson SureColor F-Series Network Manual

Tips for Administrator

Setting an IP Address on the Printer's Control Panel

After connecting the printer to the network, you need to set the IP address for the network
interface.
To set the IP address, subnet mask, and default gateway from the control panel, follow the
steps below.
1. Turn on your printer.
2. Press the Menu button on the printer's control panel.
3. Press the Up or Down button until Network Setup appears. Then press the OK button.
4. Press the Up or down button until IP Address Setting appears. Then press the OK
button.
5. Do one of the following to obtain an IP address:
O Choose Auto when getting the IP address from a DHCP server. The IP address is automatically obtained
from the DHCP server whenever the printer is reset or turned on.
O Choose Panel when manually setting the IP address, subnet mask, and default gateway using the printer's
control panel.
Note:
To use Auto, a DHCP server must be correctly configured on the network. See the online help of
your operating system for detailed instructions.
Print a network status sheet to confirm the new IP address.
Note:
You must first set the IP address before using EpsonNet Config with Web Browser.
O
See the User's Guide for more information about settings on the printer's control panel.
O
Tips for Administrator
48