Configuring The Network Interface (Windows) - Epson SureColor F-Series Network Manual

Note:
You can use 10Base-T, 100Base-TX, and 1000Base-T Ethernet. When you print a lot of data, we
recommend you use the higher speed.
3. Turn on your printer. After the status lights go off, print a network status sheet.
Important:
After turning off the printer, wait until the status lights go off before turning it back on; otherwise the
network interface may not work correctly.
Now, you can configure the network interface to use on the TCP/IP network and also install
the printer driver using the Software Disc shipped with your printer.
If you are using Windows, see "Configuring the Network Interface (Windows)" on page 19.
If you are using OS X, see "Configuring the Network Interface (OS X)" on page 20.

Configuring the Network Interface (Windows)

Configure the network interface for use on the TCP/IP network and install the printer driver
on your computer.
1. Make sure your printer is connected to the network (a hub or router).
2. Insert the Software Disc into the CD/DVD drive.
Note:
If you see the AutoPlay window, click Run setup.exe. If you see the User Account Control screen,
click Yes or Continue.
3. The software installer screen opens automatically.
If the software installer screen does not appear, double-click setup.exe on the
Software Disc.
4. Select your language, and then click the Next button.
5. Click the Next button at the Welcome screen
6. Click the Agree button to accept the license terms.
7. The Software Select screen appears. To print via a network, make sure to select the
Epson Driver and Utilities check box and EpsonNet Configuration Utility check
box, then click the Install button.
Note:
If your printer is connected to your computer with a USB cable, clear the EpsonNet Configuration
Utility check box.
19
How To