Configuring The Network Interface - Epson Stylus Pro WT7900 Network Manual

Now you can configure the network interface to use TCP/IP on the network
and print a network status sheet.

Configuring the Network Interface

After connecting the printer to the network, you need to configure the network
interface for use on a TCP/IP network. The following items are used to make
network settings on the printer's control panel (available only when
NETWORK SETUP is set to ENABLE):
Item
NETWORK SETUP
IP ADDRESS SETTING
IP,SM,DG SETTING
BONJOUR
INIT NETWORK SETTING
Follow these steps to set the IP address, subnet mask, and default gateway
from the control panel:
1. Make sure that the printer is turned on, and the LCD displays READY.
2. Press the Menu r button on the printer to enter the printer's menu system.
3. Press d to highlight NETWORK SETUP, then press r.
4. Press r, then d to highlight ENABLE.
5. Press OK. A checkmark (✓) appears next to ENABLE to show that it's
selected.
6. Press l to go back, then press d to highlight IP ADDRESS SETTING.
16
Setting Up Your System for Network Printing
Parameter
DISABLE, ENABLE
AUTO, PANEL
IP ADDRESS
000.000.000.000 to 255.255.255.255
(default setting is 192.168.192.168)
SUBNET MASK
000.000.000.000 to 255.255.255.255
(default setting is 255.255.255.000)
DEFAULT GATEWAY
000.000.000.000 to 255.255.255.255
(default setting is 255.255.255.255)
ON, OFF
EXECUTE