Configuring The Network Interface; Installing The Printer Driver; About Installing The Printer Driver; Windows 8.1/8/7/Vista/Server 2012/Server 2008 - Epson SureColor SC-P10070 Network Manual

Configuring the Network Interface

Configure the network interface for use on the TCP/IP network by installing the EpsonNet Print (For
Windows Users) and the printer driver on your computer.
For detals about EpsonNet Print, see "EpsonNet Print (For Windows Users)" on page 36.
For installation of the printer driver, see "Installing the Printer Driver" on page 19.

Installing the Printer Driver

About Installing the Printer Driver

To print to the network printer, you need to install the printer driver on the computer. The following
section explains how to instal the printer driver manually. See the section in this chapter appropriate
for your operating system.
Note:
❏ For Windows users, you can get the printer driver from the Software Disc shipped with your printer.
❏ If your computer does not have a CD/DVD drive, download the driver from the Epson website, and
then install it.
http://www.epson.eu/support/ (Europe)
http://support.epson.net/ (outside Europe)

Windows 8.1/8/7/Vista/Server 2012/Server 2008

The printer driver installation procedure differs depending on the printing method you prefer.
TCP/IP printing
Note:
If you are using EpsonNet Print, the setup procedure is different. See "About EpsonNet Print" on
page 36 for details. Note that EpsonNet Print does not support IPv6 environment.
1. Open the Control Panel, and then View devices and printers (Windows 8.1/8/7/Server 2012)
or Printers (Windows Vista/Server 2008).
Epson Network Guide
How To 19