Pvh58 Power Vent Parts List - Kingsman HBZDV4740 Installation Instructions Manual

NUMBER DESCRIPTION
PVH58 Horizontal Power Vent Termination
PVC58MV Power Vent Control Module – Millivolt Box
PVC58IPI Power Vent Control Module – IPI Box
PVH20H Main Wiring Harness Assembly – Extension Harness (20ft)
For fireplaces to be converted to hard pipe (Duravent-DirectVent Pro, etc.) at the fireplace:
ZDVDKA Duravent Fireplace Adapter (ZRB46 Only)
ZDVDFA Duravent Fireplace Adapter
ZDVDIA Duravent Pipe Increaser (Adapts 4/6-5/8" venting to 5/8")
For Power Vent installations where flex pipe will be used up to the Power Vent unit:
Z47PVA
Pipe Reducer 8"Sm – 7"Sm, Pipe Reducer 5"Sm – 4"Sm (Adapts PVH58 to accept 4/7" Flex Pipe
* One 12" section of hard pipe must be connected directly to the Power Vent before any adapters are connected.
Order the appropriate lengths of venting (see below).
ZDVFK5
Flex Kit (4" & 7" Dia.) x 2.5' (Unexpanded) 5' Expanded
ZDVFK8
Flex Kit (4" & 7" Dia.) x 4' (Unexpanded) 8' Expanded
Flex Kit (4" & 7" Dia.) x 10' (Unexpanded) 20' Expanded
ZDVFK20
*Kits are complete with spring stand-offs & silicone.
ZDV4FC
Flex Connector 4" Diameter
ZDV7FC
Flex Connector 7" Diameter
ZDV4SS Spring - Standoff Spacer for Inner Pipe

PVH58 POWER VENT PARTS LIST

4/7 VENTING AND VENTING ADAPTERS
37