Rear Fog Lamp; License Plate Lamp - Jeep 2015 Cherokee Operating Information Manual

5. Disconnect the electrical connector.
6. Twist the socket counterclockwise and re-
move from lamp.
7. Pull the bulb to remove it from the socket.
8. Replace the bulb, reinstall the socket.
9. Connect the electrical connector.
10. Reinstall the trim panel and the lower trim.
11. Close the liftgate.
394

Rear Fog Lamp

1. Using a small screwdriver or fiber stick,
press the locking tab on the reflex side of the
lamp and pull the lamp assembly out for
removal.
2. Disconnect the electrical connector.
3. Twist the socket counterclockwise and re-
move from lamp.
4. Pull the bulb to remove it from the socket.
5. Replace the bulb and twist the socket clock-
wise to reinstall.
6. Connect the electrical connector.
7. Reinstall the lamp by sliding the hook on the
fog lamp side over the locking tab in the
bumper opening and pushing the reflex side
into the bumper to snap the lamp assembly
back into place.

License Plate Lamp

1. Using a small screwdriver, press inward the
locking tab on the side of the lamp assembly
and pull down on the lamp assembly for
removal.
2. Pull bulb from socket, replace, and reinstall
the lamp assembly into place ensuring the
locking tab is secure.