Jeep 2015 Cherokee Operating Information Manual page 223

• Forward Collision Warning (FCW) Active
Braking — If Equipped
The FCW system includes Advanced Brake
Assist (ABA). When this feature is selected, it
will apply the brakes to slow your vehicle in case
of potential forward collision. The ABA applies
additional brake pressure when the driver re-
quests insufficient brake pressure to avoid a
potential frontal collision. The ABA system be-
comes active at 5 mph (8 km/h).
For further information, refer to "Forward Colli-
sion Warning (FCW) With Mitigation" in "Under-
standing The Features Of Your Vehicle".
• LaneSense Warning — If Equipped
When this feature is selected, it sets the dis-
tance at which the steering wheel will provide
feedback for potential lane departures. The
LDW sensitivity can be set to provide either an
"early," "medium," or "late" warning zone start
point.
For further information, refer to "LaneSense
Warning (LDW)" in "Understanding The Fea-
tures Of Your Vehicle".
220
• LaneSense Strength — If Equipped
When this feature is selected, it sets the
strength of the steering wheel feedback for
potential lane departures. The amount of direc-
tional torque the steering system can apply to
the steering wheel to correct for vehicle lane
departure can be set at "Low," "Medium" or
"High."
For further information, refer to "Lane Departure
Warning (LDW)" in "Understanding The Fea-
tures Of Your Vehicle".
• ParkSense® — If Equipped
The Rear Park Assist system will scan for
objects behind the vehicle when the transmis-
sion shift lever is in REVERSE and the vehicle
speed is less than 11 mph (18 km/h). The
system can be enabled with Sound Only, or
Sound and Display. To change the Park Assist
status, press and release the "Sound" or
"Sound and Display" button. Then press the
back arrow button on the touchscreen.
Refer to "ParkSense® Rear Park Assist" in
"Understanding The Features Of Your Vehicle"
for system function and operating information.
• Front ParkSense® Volume — If
Equipped
Front Park Assist chime volume settings can be
selected from the EVIC/DID or Uconnect® Sys-
tem (if equipped). The chime volume settings
include "LOW," "MEDIUM," and "HIGH." The
factory default volume setting is MEDIUM.
• Rear ParkSense® Volume — If Equipped
Rear Park Assist chime volume settings can be
selected from the EVIC/DID or Uconnect® Sys-
tem (if equipped). The chime volume settings
include "LOW," "MEDIUM," and "HIGH." The
factory default volume setting is MEDIUM.
• Rear ParkSense® Braking Assist — If
Equipped
When this feature is selected, the park assist
system will detect objects located behind the
vehicle and utilize autonomous braking to stop
the vehicle.
Refer to "ParkSense® Rear Park Assist" in
"Understanding The Features Of Your Vehicle"
for system function and operating information.