Automatic Temperature Control (Atc) - Jeep 2015 Cherokee Operating Information Manual

Recirculation
When outside air contains smoke,
odors, or high humidity, or if rapid
cooling is desired, you may wish to
recirculate interior air by pressing
the Recirculation control button.
The recirculation indicator will illu-
minate when this button is selected. Press the
button a second time to turn off the Recircula-
tion mode and allow outside air into the vehicle.
NOTE:
In cold weather, use of Recirculation mode
may lead to excessive window fogging. The
recirculation feature may be unavailable (but-
ton on the touchscreen greyed out) if condi-
tions exist that could create fogging on the
inside of the windshield. On systems with
Manual Climate Controls, the Recirculation
mode is not allowed in Defrost mode to im-
prove window clearing operation. Recircula-
tion will be disabled automatically if this mode
is selected. Attempting to use Recirculation
while in this mode will cause the LED in the
control button to blink and then turn off.

Automatic Temperature Control (ATC)

Automatic Operation
1. Press the AUTO button on the Automatic
Temperature Control (ATC) Panel.
2. Next, adjust the temperature you would like
the system to maintain by adjusting the
driver and passenger temperature control
buttons. Once the desired temperature is
displayed, the system will achieve and auto-
matically maintain that comfort level.
3. When the system is set up for your comfort
level, it is not necessary to change the
settings. You will experience the greatest
efficiency by simply allowing the system to
function automatically.
NOTE:
• It is not necessary to move the tempera-
ture settings for cold or hot vehicles. The
system automatically adjusts the tem-
perature, mode, and blower speed to pro-
vide comfort as quickly as possible.
• The temperature can be displayed in U.S.
or Metric units by
Uconnect® customer-programmable fea-
ture. Refer to the "Uconnect® Settings" in
this section of the manual.
To provide you with maximum comfort in the
Automatic mode, during cold start-ups the
blower fan will remain on low until the engine
warms up. The blower will increase in speed
and transition into Auto mode.
Manual Operation Override
The system allows for manual selection of
blower speed, air distribution mode, A/C status
and recirculation control.
The blower fan speed can be set to any fixed
speed by adjusting the blower control. The fan
will now operate at a fixed speed until additional
speeds are selected. This allows the front oc-
cupants to control the volume of air circulated in
the vehicle and cancel the Auto mode.
The operator can also select the direction of the
airflow by selecting one of the available mode
settings. A/C operation and Recirculation con-
trol can also be manually selected in Manual
operation.
selecting the
241