To Start The Engine While In Autostop Mode - Jeep 2015 Cherokee Operating Information Manual

Other Factors Which Can Inhibit Autostop
Include:
• Fuel level.
• Accelerator pedal input.
• Engine temp too high.
• 5 MPH threshold not achieved from previous
AUTOSTOP.
• Steering angle beyond threshold.
• ACC is on and speed is set.
It may be possible for the vehicle to be driven
several times without the STOP/START system
going into a STOP/START READY state under
more extreme conditions of the items listed
above.
To Start The Engine While In
Autostop Mode
While in a forward gear, the engine will start
when the brake pedal is released or the throttle
pedal is depressed. The transmission will auto-
matically re-engage upon engine restart.
Conditions That Will Cause The Engine To
Start Automatically While In Autostop Mode:
• The transmission selector is moved out of
DRIVE.
• To maintain cabin temperature comfort.
• HVAC is set to full defrost mode.
• HVAC system temperature or fan speed is
manually adjusted.
• Battery voltage drops too low.
• Low brake vacuum (e.g. after several brake
pedal applications).
• STOP/START OFF switch is pressed.
• A STOP/START system error occurs.
• 4WD system is put into 4LO mode.
Conditions That Force An Application Of
The Electric Park Brake While In Autostop
Mode:
• The drivers door is open and brake pedal
released.
• The drivers door is open and the drivers seat
belt is unbuckled.
• The engine hood has been opened.
• A STOP/START system error occurs.
If the Electric Park Brake is applied with the
engine off, the engine may require a manual
restart and the electric park brake may require a
manual release (depress brake pedal and press
Electric Park Brake switch). Refer to "Electronic
Vehicle Information Center (EVIC)" or "Driver
Information Display (DID)" in "Understanding
Your Instrument Panel" for further information.
259