Jeep 2015 Cherokee Operating Information Manual page 222

Clock
After pressing the "Clock" button on the touch-
screen the following settings will be available:
• Sync Time With GPS
This feature will allow the radio to sync time with
a GPS signal. To change the Sync Time setting,
press the "Sync time with GPS" button on the
touchscreen until a check-mark appears next to
the setting, showing that setting has been se-
lected. Press the back arrow button on the
touchscreen to return to the previous menu.
• Set Time Hours
This feature will allow you to adjust the hours.
The "Sync time with GPS" button on the touch-
screen must be unchecked. To make your se-
lection, press the "+" or "–" buttons on the
touchscreen to adjust the hours up or down.
Press the back arrow button on the touchscreen
to return to the previous menu.
• Set Time Minutes
This feature will allow you to adjust the minutes.
The "Sync time with GPS" button on the touch-
screen must be unchecked. To make your se-
lection, press the "+" or "–" buttons on the
touchscreen to adjust the minutes up or down.
Press the back arrow button on the touchscreen
to return to the previous menu.
• Time Format
This feature will allow you to select the time
format display setting. Press the "Time Format"
button on the touchscreen until a check-mark
appears next to the "12hrs" or "24hrs" setting,
showing that setting has been selected. Press
the back arrow button on the touchscreen to
return to the previous menu.
• Show Time In Status Bar — If Equipped
This feature will allow you to turn on or shut off
the digital clock in the status bar. To change the
Show Time Status setting press the "Show Time
in Status Bar" button on the touchscreen until a
check-mark appears next to setting, indicating
that the setting has been selected. Press the
back arrow button on the touchscreen to return
to the previous menu.
Safety & Driving Assistance
After pressing the "Safety & Driving Assistance"
button on the touchscreen the following settings
will be available:
• Forward Collision Warning (FCW) — If
Equipped
The Front Collision Warning (FCW) feature can
be can be set to Far, or set to Near. The default
status of FCW is the Far setting. This means the
system will warn you of a possible collision with
the vehicle in front of you when you are farther
away. This gives you the most reaction time. To
change the setting for a more dynamic driving
experience, select the Near setting. This warns
you of a possible collision when you are much
closer to the vehicle in front of you. To change
the FCW status, press and release the "Near" or
"Far" button. Then press the back arrow button
on the touchscreen.
For further information, refer to "Adaptive
Cruise Control (ACC)" in "Understanding The
Features Of Your Vehicle".
219