Jeep 2015 Cherokee Operating Information Manual page 241

mum temperature settings for best windshield
and side window defrosting and defogging. Per-
forming this function will cause the ATC to
switch into manual mode. If the front defrost
mode is turned off the climate system will return
to the previous setting.
6. Rear Defrost Button
Press and release this button to turn on the rear
window defroster and the heated outside mir-
rors (if equipped). An indicator will illuminate
when the rear window defroster is on. The rear
window defroster automatically turns off after 10
minutes. For each additional press of this but-
ton, five additional minutes will be added to the
timer function.
CAUTION!
Failure to follow these cautions can cause
damage to the heating elements:
238
CAUTION! (Continued)
• Use care when washing the inside of the
rear window. Do not use abrasive window
cleaners on the interior surface of the
window. Use a soft cloth and a mild wash-
ing solution, wiping parallel to the heating
elements. Labels can be peeled off after
soaking with warm water.
• Do not use scrapers, sharp instruments, or
abrasive window cleaners on the interior
surface of the window.
• Keep all objects a safe distance from the
window.
7. Passenger Temperature Control Up But-
ton (Uconnect® 8.4 Only)
Provides the passenger with independent tem-
perature control. Push the button on the face-
plate for warmer temperature settings or on the
(Continued)
touchscreen, press and slide the button on the
touchscreen temperature bar towards the red
arrow button on the touchscreen for warmer
temperature settings.
NOTE:
Pressing this button while in Sync mode will
automatically exit Sync.
8. Passenger Temperature Control Down
Button (Uconnect® 8.4 Only)
Provides the passenger with independent tem-
perature control. Push the button on the face-
plate for cooler temperature settings or on the
touchscreen, press and slide the button on the
touchscreen temperature bar towards the blue
arrow button on the touchscreen for cooler
temperature settings.
NOTE:
Pressing this button while in Sync mode will
automatically exit Sync.
9. SYNC
Press the Sync button on the touchscreen to
toggle the Sync feature On/Off. The Sync indica-
tor is illuminated when this feature is enabled.
Sync is used to synchronize the passenger tem-
perature setting with the driver temperature set-
ting. Changing the passenger temperature setting
while in Sync will automatically exit this feature.