Installing The Pci-X/Pcie I/O Backplane Board Into The I/O Backplane Assembly; I/O Backplane Removed; Installing The Pci-X/Pcie I/O Backplane - HP Integrity rx2660 User's & Service Manual

Figure B-3 I/O Backplane Removed
I/O backplane posts
1
3. Place the PCI-X I/O backplane in a static-free bag.

Installing the PCI-X/PCIe I/O Backplane Board Into the I/O Backplane Assembly

Use this procedure to install the I/O backplane into the I/O backplane assembly.
1. Align the PCI-X/PCIe I/O board keyways with the posts on the I/O backplane assembly.
Figure B-4 (page 211)
2. Slide the I/O backplane up to lock it onto the I/O backplane assembly posts.
Figure B-4 Installing the PCI-X/PCIe I/O Backplane
Slot 1 (PCIe x8)
1
Slot 2 (PCIe x8)
2
Slot 3 (PCI-X 133 MHz)
3
PCI-X/PCIe I/O backplane
4
3. Install and tighten the three T-15 screws to attach the I/O board to the I/O backplane assembly
PCI-X I/O backplane
2
shows the locations of the posts on the I/O backplane assembly.
PCI-X/PCIe I/O backplane keyways
5
I/O backplane posts
6
Bulkhead T-15 thumbscrews
7
Upgrading the I/O Backplane 211