Installing A Pci Riser Board Assembly - HP ProLiant SL250s Gen8 Server User Manual

Install the expansion board into the slot until it seats firmly. To install an expansion board in PCI
5.
expansion slot 1, use the same procedures.
Install the PCI riser board assembly.
6.
IMPORTANT:
properly.
Connect any required internal cables to the expansion board. Refer to the documentation that ships with
7.
the expansion board.
Install the server into the chassis
8.
Connect any required external cables to the expansion board. Refer to the documentation that ships
9.
with the expansion board.
Power up the server (on page 15).
10.

Installing a PCI riser board assembly

Power down the server
1.
Remove the server from the chassis (on page 15).
2.
If necessary, install the expansion boards
3.
The server does not power up if the PCI riser board assembly is not seated
("Installing the server into the
("Power down the node" on page 15).
("Installing an expansion
chassis" on page 21).
board" on page 50).
Hardware options installation 51