Installing The Pci-X/Pcie I/O Backplane Board Into The I/O Backplane Assembly - HP Integrity rx2660 User's & Service Manual

Figure 88 I/O Backplane Post Locations
I/O backplane posts
1
3. Place the PCI-X I/O backplane in a static-free bag.

Installing the PCI-X/PCIe I/O Backplane Board Into the I/O Backplane Assembly

To install the I/O backplane into the I/O backplane assembly:
1. Align the PCI-X/PCIe I/O board keyways with the posts on the I/O backplane assembly.
Figure 89 (page 208)
2. Slide the I/O backplane up to lock it onto the I/O backplane assembly posts.
Figure 89 Installing the PCI-X/PCIe I/O Backplane
Slot 1 (PCIe x8)
1
Slot 2 (PCIe x8)
2
Slot 3 (PCI-X 133 MHz)
3
PCI-X/PCIe I/O backplane
4
3. Install and tighten the three T- 1 5 screws to attach the I/O board to the I/O backplane assembly
208 Upgrades
PCI-X I/O backplane
2
shows the locations of the posts on the I/O backplane assembly.
PCI-X/PCIe I/O backplane keyways
5
I/O backplane posts
6
Bulkhead T- 1 5 thumbscrews
7