Input Configuration Menu
Overview
This menu is used for pertaining data to the input signals.
When Input Configuration is selected, the following menus are displayed.
iInput Configuration
CH01
Format
B
Slot No:
xxxxx
xxxxx
Input No:
Screen Aspect
B
Sync Mode:
xxx
Color Temp:
xxx
Picture Preset:
xxxxx
Matrix/Gamma
B
B
Color Gamut
The current channel is displayed. Perform the input setting
for the selected channel.
Before setting
Set the input signal for each channel. A channel number (1
to 30) is entered with the numeric buttons (page 36).
Menu Function and Operation
Menu
Format
3G/HD/SD-SDI
v
1/3
iInput Configuration
V
CH01
Marker Preset:
H Shift Offset:
Channel Name
NTSC Setup
Level::
Component Level:
Betacam Setup
Level::
RGB
Range:
1080I/PsF
Film
Cadence::
Function and operation ([
Sets the input signal type.
Note
The default setting is HD-SDI/D1 Auto. Set Format except for when the BKM-243HS, BKM-
244CC or BKM-250TG is installed.
Sets the serial digital signal format (Single-link 3G-SDI, HD-SDI or SD-SDI) when BKM-220D,
BKM-243HS, BKM-244CC or BKM-250TG is installed.
When BKM-220D is installed
D1
When BKM-243HS or BKM-244CC is installed
[HD-SDI/D1 Auto]: Changes the format automatically according to the format of the
input signal.
D1
v
iInput Configuration
2/3
V
CH01
xxxxx
Copy From
xxx
B
xx
xxxxx
xxx
B
B
xxx
Note
This menu is not selectable in the following cases:
• When Side by Side is set to On
• When Wipe is set to On
• When Butterfly is set to On
• When Blending is set to On
]: factory setting)
v
3/3
V
B
51
Input Configuration Menu