Table of Contents
Advertisement
Menu
SDI Payload ID Status
HDMI Status
Model Name
Serial No
Software Version
Operation Time
Backlight
Network Switch
Controller Status
Model Name
Serial No
Software Version
Network Switch
84
Status Menu
Function and operation ([
Displays the information of the Payload ID data superimposed on the SDI signal and current
signal status of the monitor.
When the option slot number in which the BKM-250TG is installed is selected in Slot No of
the Input Configuration menu, the following is displayed.
Option1/Input1: Option slot and input connector of the displayed information
Payload ID XX XX XX XX: Displays the 4-byte data for Payload ID of the SMPTE-
352M standard in hexadecimal in sequence of Byte 1, Byte 2, Byte 3 and Byte 4.
When the Payload ID information is not set, only Current Status is displayed and "---" is
displayed for other items. When the following information is not decoded, Unknown is
displayed.
Video Standard: Decode display of Byte 1_Bit 6-0 (SD-SDI/HD-SDI/3G-SDI/Dual
Link HD-SDI, etc.)
Sampling Structure: Decode display of Byte 3_Bit 3-0 (4:2:2 Y/Cb/Cr / 4:4:4 Y/Cb/
Cr / 4:4:4 G/B/R, etc.)
Bit Depth: Decode display of Byte 4_Bit 1-0 (8bit/10bit/12bit)
Picture Rate: Decode display of Byte 2_Bit 3-0 (23.98/24/25/29.97/30/50/59.94/60)
I/PsF/P: Decode display of Byte 2_Bit 7-6 (Interlace/PsF/Progressive)
Link Number: Decode display of Byte 4_Bit 7-6 (Single/Link_1 / Link_2 / Link_3 /
Link_4)
Current Status: Current status of the monitor
Format: Displayed as "Video Standard + Sampling Structure + Bit Depth"
Video Standard: 3G/DL/HD/SD
Sampling Structure: 422 YPbPr/444 YPbPr/ 444 RGB/444 XYZ
Bit Depth: 10/12
I/PsF/P: Interlace/PsF/Progressive
Displays the signal information of the HDMI signal.
Pixel Encoding: RGB 4:4:4/YCbCr 4:4:4/YCbCr 4:2:2
Color Depth: 8bit/10bit/12bit
Matrix/Gamma: ITU-R BT.601/ITU-R BT.709/xvYCC 601/xvYCC 709
RGB Range: Limit/Full
Notes
• When HDMI Auto is set to On in the Matrix/Gamma menu of the Input Configuration menu,
the Matrix/Gamma status is displayed.
• When HDMI Auto is set to On in the RGB Range menu of the Input Configuration menu,
the RGB Range status is displayed.
Displays the model name of the monitor.
Displays the serial number of the monitor.
Displays software version of the monitor.
Displays operation time (hours, in total) of the monitor.
Displays brighten time (hours, in total) of the monitor backlight.
Displays the NETWORK switch setting.
Displays information on the controller.
Displays the model name.
Displays the serial number.
Displays software version.
Displays the NETWORK switch setting.
]: factory setting)
Advertisement
Table of Contents
