Table of Contents
Advertisement
Example of Dual-link cable connection
OPTION 3 and 4
INPUT 1
INPUT 2
When the BKM-250TG is used, install the Link A signal
to INPUT 1, and the Link B signal to INPUT 2.
INPUT 1
For 3D signal analyzing function
Use a 3D-compatible BKM-250TG (with serial number
7100001 or higher) and input the left 3D signal to INPUT 1
and the right signal to INPUT 2.
22
Removing the Protection Plate
OPTION 1 and 2
INPUT 1
INPUT 2
INPUT 2
Removing the Protection
Plate
The protection plate is installed on the monitor to protect
the LCD panel at the factory.
You can remove the protection plate when the picture
differs in color from that without the protection plate and/
or when there is more reflection of light than without.
1
Remove the four screws and then remove the
protection plate.
2
Reinstall the four screws in their original position on
the monitor.
Advertisement
Table of Contents
