Input Configuration Menu; Overview; Menu Function And Operation - Sony PVM-L1700 Operation Manual

Input Configuration Menu

Overview

This menu is used for pertaining data to the input signals.
When Input Configuration is selected, the following menus are displayed.
iInput Configuration
CH01
Format B
Slot No: xxxxx
xxxxx
Input No:
Screen Aspect B
Sync Mode: xxx
Color Temp: xxx
Picture Preset: xxxxx
Matrix/Gamma B
B
Color Gamut
The current channel is displayed. Perform the input setting
for the selected channel.
Before setting
Set the input signal for each channel. A channel number (1
to 30) is entered with the numeric buttons (page 37).

Menu Function and Operation

Menu
Format
3G/HD/SD-SDI
v
1/3 iInput Configuration
V
CH01
Marker Preset:
H Shift Offset:
Channel Name
NTSC Setup Level::
Component Level:
Betacam Setup Level::
RGB Range:
1080I/PsF
Function and operation ([
Sets the input signal type.
Note
The default setting is HD-SDI/D1 Auto. Set Format except for when the BKM-243HS, BKM-
244CC or BKM-250TG is installed.
Sets the serial digital signal format (Single-link 3G-SDI, HD-SDI or SD-SDI) when BKM-220D,
BKM-243HS, BKM-244CC or BKM-250TG is installed.
When BKM-220D is installed
D1
When BKM-243HS or BKM-244CC is installed
[HD-SDI/D1 Auto]: Changes the format automatically according to the format of the
input signal.
D1
v iInput Configuration
2/3
V
CH01
xxxxx Copy From
xxx
B
xx
xxxxx
xxx
B
B
Note
This menu is not selectable in the following cases:
• When Side by Side is set to On
]: factory setting)
v
3/3
V
B
51
Input Configuration Menu