Copying The Setting Or Adjustment Value To Another Monitor - Sony BVM-L170 Operation Manual

2
Select Checkerboard display or L/R Switch display
with the function button* of the controller or in the
Function Switch menu of the Display Function menu,
and set it to On.
If the Checkerboard or L/R Switch function has been
assigned to a pin of the PARALLEL REMOTE
connector, set Parallel Remote to On in the System
Configuration menu.
* Checkerboard display or L/R Switch display is assigned
to the function button of the controller in the Function
Key menu (page 88) of the Controller menu.
For details on the Function Switch menu, see "Function
Switch" (page 72) of the Display Function menu.
For details on Parallel Remote, see "Parallel Remote"
(page 77) of the System Configuration menu.
To view the Checkerboard display
Set Checkerboard to On to display the left and right signals
in a checkerboard pattern on the screen. Set it to Off to
return to the normal display (the currently selected left or
right signal only).
To view the L/R Switch display
Set L/R Switch to On to switch the displayed left or right
signal to the other signal. Set it to Off to return to the
normal display (the currently selected left or right signal
only).
Notes
• To use the 3D signal analyzing function, use the BKM-
250TG with serial number 7100001 or higher.
• To assign Checkerboard or L/R Switch to the function
button of the controller, use the controller with software
version 1.5 or higher.
• The Checkerboard or L/R Switch display is set to Off if
you change the channel number when the corresponding
display has been set to On.
• The Checkerboard or L/R Switch display is set to Off if
you display the Picture&Picture image when the
corresponding display has been set to On.
• The Checkerboard or L/R Switch display may not be
executed correctly if the input signal system is changed
when the corresponding display has been set to On.
• The Checkerboard or L/R Switch display cannot be
activated in the following cases:
– When the option slot number in which the BKM-
250TG (with serial number 7100001 or higher) is
installed is not selected in Slot No of the Input
Configuration menu.
– When the dual-link display is used
– When the internal signal is displayed
– When the captured frame is displayed
100

Copying the Setting or Adjustment Value to Another Monitor

Copying the Setting or
Adjustment Value to
Another Monitor
You can save the setting or adjustment value in the
"Memory Stick" and copy it to another monitor.
1
Insert the "Memory Stick" into the Memory Stick
insertion slot of the controller.
For details on the "Memory Stick", see
"Inserting/Ejecting the "Memory Stick"" on page
141.
2
Select Memory Stick in the Save To menu (page 81) of
the File Management menu, and then select New Name
or the existing file name.
When you select New Name, the display to create a
new name appears.
Display example
iiiFile Management
Save to Memory Stick
New Name
File1
File2
File3
Enter a new name (1 to 20 characters).
When the existing file name is selected, the display to
confirm a file name appears.
Display example
iiiiFile Management
Save to Memory Stick
FileX
Overwrite this file?
OK: ENTER Cancel: MENU