Auger Mark
Problem
The printed result has auger mark.
Action
Stir the developer in a drum cartridge.
1
On the operator panel, press the
Maintenance Mode Clean Developer.
2
Press the
button.
If the problem persists, replace the drum cartridge if you have a spare cartridge.
Replace the drum cartridge if you have a spare cartridge.
See also:
•
"Replacing the
Drum
Cartridge" on page 189
•
"Installing a
Drum
Cartridge" on page 191
If the problem persists, contact the Fuji Xerox local representative office or an authorized
dealer.
(Menu) button and select Admin Menu
Troubleshooting
171