Receiving A Position Request - Standard Horizon Eclipse GX1300 Owner's Manual

11. When the GX1300 receives the position from the polled vessel, the
GX1300 will produce a ringing alarm sound and the position from the
polled vessel is sent to a GPS chart plotter via NMEA 0183. (DSC BEEP
needs to be enabled to hear alarm.)
Press any key to stop the alarm.
INFO
12. Press the
data transferred from the polled vessel on the
display.
13. Press the ▲ / ▼ keys to change the display to
view the received data.
14. To exit from position request display, press the
QUIT
soft key.
If the GX1300 does not receive position data from the polled vessel,
the LCD will show " NO POSITION DATA ".

9.7.2 Receiving a Position Request

When a position request call is received from another vessel, a ringing alarm
will sound and " POS REQUEST " will be shown in the LCD.
1. When a position request call is received,
the GX1300 will transmit your position to the
vessel who requested it.
2. To exit from position request display, press the
QUIT
soft key.
Page 66
soft key to show the position
NOTE
RX POS REPLY
366901555
POS ACKNOWLEDGED
SINCE: 00:05
INFO QUIT
RX POS REPLY
POS INFO
POS: 23°56.890N
123°56.890W
TIME: 12:56 UTC
BACK QUIT
RX POS REPLY
123°56.890W
TIME: 12:56 UTC
DST: 29.8NM
BRG: 270°T
BACK QUIT
RX POS REQUEST
YAESU
POS REPLY
SINCE: 00:05
[ Transmitted
QUIT
GX1300
]