Navigation Indication - Standard Horizon INTREPID + GX1270S Owner's Manual

BUSY HI USA
T/W CH16
VTS
4. To stop scanning, press the SCAN, 16/9, WX, or PTT key.
Triple watch (T/W) means the radio is watching CH70 for DSC Calls.
Dual watch (D/W) means the radio is not watching CH70 for DSC Calls.

5.10 NAVIGATION INDICATION

The transceiver has the ability to display the time, SOG and COG date, as
well as the vessel's position (LAT/LON), if connected to a GPS receiver.
JUN15 8:45P
15 KT 160T
.
35 55. 000'N
.
138 28. 000'W
HI USA
INVALID
NO POSTION
DATA
• The TIME OFFSET should be set to local time in the DSC/RADIO
setup mode when the radio is connected the GPS navigation
receiver. To adjust TIME OFFSET to your local time, refer to section
7.11 TIME OFFSET.
page 17
3. The scanning will be performed while receiving
the MEM CH (memorized channel).
A
NOTE
1. Press the NAV key to display position
information.
A If the GPS receiver receives no signal, the
display will as shown in the illustration on the
left.
A
2. To hide the position information, press the NAV
key.
NOTE
Owner's Manual GX1270S