50. Plug the 16-pin connector from the supplied interior
harness into the supplied mirror (Figure 35).
Figure 35
51. Install the supplied mirror on the mounting button
and slide it downwards. Secure by tightening the
T20 Torx screw to 1.8 Nm (16 lb-in.), while not
exceeding 2.2 Nm (19.5 lb-in.).
52. If equipped, reinstall modified Rain Sensor from
Section 3.
9521 Instructions 2-12-15.doc
INSTALLATION INSTRUCTIONS
Section 8: Supplied Mirror Installation
17 of 35