Relocating The Compass Circuit Board For Vehicles With External Compass Module - BrandMotion 9002-9521 Installation Instructions Manual

Relocating the Compass Circuit Board for vehicles with External Compass Module

(if required)
69. Remove the separate compass module from the
existing interior mirror by sliding it downwards
(Figure 49).
70. Unplug connector from the compass module (Figure
50).
9521 Instructions 2-12-15.doc
INSTALLATION INSTRUCTIONS
Section 10D: Reference –
Figure 49
Figure 50
71. Pry the compass module apart with a screwdriver
(Figure 51).
72. Remove the circuit board from the compass module
(Figure 52.
33 of 35
Figure 51
Figure 52