Relocating the Compass Circuit Board for vehicles with External Compass
Module continued
73. Wrap the circuit board in the supplied foam and cut
an opening for connector terminal (Figure 53).
Figure 53
74. Plug the compass module connector into the circuit
board (Figure 54).
Figure 54
75. Install the compass module circuit board between
underneath the headliner as shown. The connector
should face up, to the rear, and to the right (Figure
55).
9521 Instructions 2-12-15.doc
INSTALLATION INSTRUCTIONS
Section 10D: Reference –
(if required)
.
34 of 35
Figure 55