Advertisement
3. Mount the housing using the provided screws to the grill and putting the caps in the holes to close
them.
4. Run the camera harness along the under hood covering, down the drive side hinge. Zip tie the harness
to the hinge so the harness will not kink or cut.
5. Run harness into the vehicle though the factory grommet in the drivers side firewall.
6. Route the camera harness to the location of the 360º module.
1. The inter door panel will have to be removed for installation of the side cameras.
2. Working on the driver side door. With the door closed, place the template sticker ( marked LHD ) on the
bottom side of the mirror with arrow aiming away from the vehicle. Perpendicular to the side of the
body. ( Do not go by mirror lines or angles .)
AVMS-3690 Instructions 9-2-16
Section 2:
Side Mirror Camera installation
Page 2 of 9
INSTALLATION INSTRUCTIONS
Advertisement
