Adding And Deleteing A Basic Routing Table - Davolink DV-332 User Manual

DV-332 Analog/Digital User Guide

7.1.1 Adding and deleteing a basic routing table

To add and delete routes in a routing table, you can use "add" and "del". If you do not specify the
port number, it is regarded as routing table "0". When you want to modify routing table "1", you
must use "add1" and "del1".
add, add0, del, del0 : these commands add and delete routes in routing table "0"
add1, del1 : these commands add and delete routes in routing table "1"
GW/CONFIG/ROUTE> del0 all
This command deletes all prefix table. Are you
GW/CONFIG/ROUTE>
Following configurations are routes to call landlines and cellular phones after successful registration
to a server. These should be set up even when you do not use calls between headquarter and
branches.
GW/CONFIG/ROUTE> add0 fxs 200 *99* 4
Prefix Table Add success
GW/CONFIG/ROUTE> add0 fxs 200 07077003241 11
Prefix Table Add success
GW/CONFIG/ROUTE> add0 fxo 201 **11~ 4
Prefix Table Add success
GW/CONFIG/ROUTE> add0 fxo 201 **1102~ 6
Prefix Table Add success
GW/CONFIG/ROUTE> add0 net 0 ~ 0 02
Prefix Table Add success
GW/CONFIG/ROUTE> add0 net 0 0~ 0
Prefix Table Add success
GW/CONFIG/ROUTE> show 0
======================================================================
1st Routing Table Show
/* This command will delete all the routes in the table. */
sure(y/n)?y
64