Davolink DV-332 User Manual page 71

===========================================================================
GW/CONFIG/REROUTE>
In order to enable backup(=reroute) feature as you can see above, you need to turn the reroute
mode "ON" first. Default value is "OFF".
GW/CONFIG/REROUTE>
Apply Success...
GW/CONFIG/REROUTE>
usage : mode on|off
current mode is on
GW/CONFIG/REROUTE>
GW supports up to 3 tables to perform backup(=reroute) processes so that users can have different
approaches and methods to 4 conditions each. This is the basic reroute configuration to PSTN lines:
GW/CONFIG/REROUTE>
mode [(1)st|(2)nd|(L)oop|(P)eerIP|(N)ull] :
route. */
prefix [null|string]
<bit flags of condition in hex>
0x00000001 : LAN Link Down
0x00000002 : Server not connected
0x00000004 : Call Timeout
0x00000008 : Unallocated number
condition
disconnection. */
play [ivr | beep | none]
generate when backup is working. */
GW/CONFIG/REROUTE>
===========================================================================
REROUTE Configurations Show
===========================================================================
mode(mode)
---------------------------------------------------------------------------
****1st. reroute****
type
prefix
condition
0x00000001 : LAN Link Down
0x00000002 : Server not connected [ON]
0x00000004 : Call Timeout
0x00000008 : Unallocated number
beep
peer ip
DV-332 Analog/Digital User Guide
mode on
mode
1st /* This can configure the first backup table. */
l
: **11 /* It adds this prefix number before checking route table. */
: 3 /* Backup will work if there's any LAN link down or server
: beep /* This option selects which kind of distinguishable sounds GW
show
: on
: IPLoop
: **11
: 0x3
: on
: 0.0.0.0
/* This option verifies routing table and choose the
[ON]
[OFF]
[OFF]
71