Alterating Connection Port Of Telnet, Web - Davolink DV-332 User Manual

Password for applied user account is enable to change. Setting example is a login with davo account
& change password.
GW/SYSTEM/ACL> password davo
Password length must be less than or equal to 8 characters
New Password : ***
Confirm Password: ***
Password for user davo changed
GW/SYSTEM/ACL>
GW/SYSTEM/ACL> password root
Password length must be less than or equal to 8 characters
New Password : *****
Confirm Password: *****
Password for user root changed
GW/SYSTEM/ACL>
Therefore, it is possible to check which user accounts are able to use.
GW/SYSTEM/ACL> show
----- ------------ ------------ ------------
IDX USER
----- ------------ ------------ ------------
1 davo
2 admin
3 root
4 guest
----- ------------ ------------ ------------
GW/SYSTEM/ACL>

8.8.2 Alterating connection port of telnet, web

Basically, the port at GW for remote connection is different from general port. Generally, 23 port
used for telnet connection but No "6000" port will be used at GW. Moreover, No 80 port will be
used for web browser(HTTP). But No "8000" port will used for GW. This is for preventing
unauthorized connections & using port can be changed as following.
GW/CONFIG/COMMON>
==========================================================================
==========================================================================
DV-332 Analog/Digital User Guide
PASS LEVEL
drc super_user
admin super_user
admin writable
guest
show
Common Configurations
common
95