Davolink DV-332 User Manual page 73

condition
/* This represents backup working conditions. If you want backup work just in the case of Lan link
down, you can choose "1". And if you want more than 2 conditions out of 4, then set up the sum of
numbers. If you want 3 conditions(Lan Link Down, Server not connected, Call timeout), you can
choose "7"(1+2+4=7). And if you want all conditions, you can choose "f"(1+2+4+8=15). */
play [ivr | beep | none]
GW/CONFIG/REROUTE>
/* This option will tell users that backup is working right before trying to call PSTN lines if backup
works. Since they can hear beep sound before calling, they know it's not via VOIP lines but PSTN
ones. */
If you configure backup settings like above, you have to set up the routing table as follows so that it
can handle newly added prefix numbers.
GW/CONFIG/ROUTE>
======================================================================
1st Routing Table Show
======================================================================
INTF PORT NUMBERS
======================================================================
FXS 200 07077003241 11
FXS 200 *99*
FXO 201 **11~
FXO 201 **1102~
FXO 202 *2???
NET 0 *1???
NET 0 0~
NET 0 ~
======================================================================
*INTF : Invalid Interface
======================================================================
GW/CONFIG/ROUTE>
Just same as we did in chapter 7, you should add routings("**11~" and "**1102~") to FXS ports that
are connected to PSTN lines. In "**1102~", 02 means local area code, you should configure it
properly.
DV-332 Analog/Digital User Guide
: 3
: beep
show
TRNC PREFIX
4
4
6
2
0
0
0 02
POSTFIX DEST_ADDR
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
220.120.246.204
0.0.0.0 C
0.0.0.0 C
73
LEVEL
C