Changing Information, Reference Function Of Sip Invite Message - Davolink DV-332 User Manual

Intf : [FXS,FXO,EM,CAS,CCS]
=>fxs
Nums : [my number]
=>0313873240
IncNum : [the number of increment:default(1)]
=>0
Count : [the count of increment:default(4)]
=>
My number 00 : 0313873240
My number 01 : 0313873240
My number 02 : 0313873240
My number 03 : 0313873240
GW/CONFIG/ADDRESS>
GW/CONFIG/ADDRESS>
======================================================================
* ADDRESS TABLE SHOW *
======================================================================
INTF PORT VIRTUAL_NUM
======================================================================
FXS 0 0313873240
FXS 1 0313873240
FXS 2 0313873240
FXS 3 0313873240
FXO 0 100
FXO 1 101
FXO 2 102
FXO 3 103
======================================================================
GW/CONFIG/ADDRESS>
Once registered No for 070-XXXX-XXXX related to configuration articles in all VoIP should input &
the article of VIRTUAL NUM in address table is changed into receiver's signal no(031-387-3240).
Then, Caller No will be changed. But No of specific field in Display name field can be displayed
according to each service provider. In this case, field shall change by using command "field" As
reference, some of service providers is not possible to change caller No at terminal so they have to
change it at server.

5.1.5 Changing information, reference function of SIP INVITE message

When sending from SIP protocol, INVITE message will be received by server or 대국terminal GW.
This message shall contain user authorization, fare, caller ID, representative ID and so on. This
contained information on INVITE message should be flexible to change the information according to
user's demand. The following articles at the information in INVITE message can use & change
according to each purpose.
DV-332 Analog/Digital User Guide
show
PEER-ADDR
NONE
NONE
NONE
NONE
200
201
202
203
GROUP-PORT
None
None
None
None
None
None
None
None
33
MODE L/RT
C/1ST
C/1ST
C/1ST
C/1ST
C/1ST
C/1ST
C/1ST
C/1ST