Fax Configuration - Davolink DV-332 User Manual

==========================================================================
yes/no prompt mode
watchdog timer
# Processing Mode
web mode
telnet mode
telnet keepalive timer
local call feature mode
ethernet wan speed type
ethernet lan speed type
telnet port
web port
digitmap mode
UPS mode
primary clock source
long/short haul transceiver
dtu block mode when wan link down (wblmode) : PHYSICAL
dtu block when dtu link down
dtu relay control
pcm_coding_law
Company name
==========================================================================
GW/CONFIG/COMMON>
In "dtu block mode when wan link down (wblmode)" option, there are 3 values you can choose.
DISABLE : This does not use this feature.
PHYSICAL : It makes Layer 1 down so that PBX will acknowledge that the digital trunk is down. Thus,
it will reroute calls to backup ports by its own policy or give "Release tone" or
announcement("Telephone is out of order").
LOGICAL : With Layer 2 and 3 all alive, it only blocks an E1 channel. When "Setup" messages come
from PBX, it will give "Release Complete" back to PBX. Q931 reason code will be "Cause
i = 0x80A2 - No circuit/channel available".

8.2 FAX configuration

It will configure FAX sending/receiving. There are two ways to set up this feature.
DV-332 Analog/Digital User Guide
(prompt) : YES
(wdt) : YES
(dtp) : END_OF_DIGIT
(web) : YES
(telnet) : YES
(keep) : 0 (sec)
(va) : YES(pickup number : **)
(wan) : AUTO
(lan) : AUTO
(tport) : 23
(wport) : 8080
(digitmode): NO
(upsmode) : NO
(clkp) : NORMAL0
(haul) : LONGHAUL
(dblchk) : NO
(drelay) : OFF
(pcm) : PCM_ALAW
(com) : DAVOLINK
75