Setting Default; Setting H.323 - Davolink DV-332 User Manual

usage : cfield addr|voip|user|mynum|null
addr : /config/address table
voip : /config/voip contact table
user : user's calling number. ex)fxo's cid | trunk intf's calling number
mynum : operator add prefix calling number
current cfield(contact) value is
current mynum is NULLGW/CONFIG/VOIP>
Command "cfield" is using for changing contact field. Default "ADDR"

5.2 Setting H.323

5.2.1 Setting Default

Basically, setup G/K IP address, H.323 ID, E.164 number for registration.
GW/CONFIG/VOIP> configure
1. RAS Config
2. Protocol Config
3. RTP Config
4. Manual RAS Config
0. exit
Select (0 ~ 3) : 1
* RAS Parameters *
---------------------------------------------------------------------------
Gatekeeper not used.
---------------------------------------------------------------------------
* Registration Numbers *
---------------------------------------------------------------------------
---------------------------------------------------------------------------
* My H323ID *
---------------------------------------------------------------------------
VOIP
---------------------------------------------------------------------------
* Timeout *
---------------------------------------------------------------------------
RRQ timer mode
RAS response timeout
RAS retry number
Q.931 response timeout
---------------------------------------------------------------------------
* RAS TTL *
---------------------------------------------------------------------------
700
DV-332 Analog/Digital User Guide
VOIP
: Received from G/K
: 5 sec
: 2
: 20 sec
41