Davolink DV-332 User Manual page 90

DV-332 Analog/Digital User Guide
Basically, if GW terminal establishes Type I, Type II also supported. In order to deliver caller ID
information to the phone shown caller ID & connected to GW, FXO/FXS port shall setup as following.
1) Setting FXO port
FXO port is for detecting caller ID information from PSTN line, establishment is as following.
GW/CONFIG/FXO> show
===========================================================================
FXO Configurations Show
===========================================================================
[Voice Output Gain]
-2 -2 -2 -2
[PCM Input Gain]
0 0 0 0
DTMF duration (dur)
DTMF interval (intv)
Inter digit timer(idt)
Post digit timer(pdt)
Wait mode (wm)
Dialtone timer(dt)
Fxo dial connect mode(dcm) :
Passwd_mode (pm)
Password (ps)
Fxo password timer (pt)
Wait dialtone time(wd)
Wait digit timer(wdt)
Wait connect from net (t2) :
Wait digit from net (t4)
Release tone play (rtp)
Silence Detection (sd)
Silence Period (sp)
Silence Level (sl)
CallerID detection(caller) :
DISABLE, DISABLE, DISABLE, DISABLE
CallerID_detect_timer(dct) :
Ring guard timer (rguard):
H/W ring det. (hwring)
Connect mode (connect)
Flash hook time (fhtime)
Force release time (frtime) :
Fxs busy (sbusy)
(vgain)<-31 ~ 31>
(igain)<-31 ~ 31>
: 120 ms
: 60 ms
: 5 sec
: 2 sec
: DIALTONE MODE
: 12 sec [Dialtone mode] [PSTN-->FXO]
disable [Dialtone mode] [PSTN-->FXO]
: disable
: 1002
: 3 sec [PASSWORD MOD]
: 1500 ms
: 7 sec [Announce mode] [PSTN-->FXO]
60 sec
: 500 ms
: 4 sec
: Disabled
: 120 sec
: -50 dBm
4000 ms
410 ms
: 2
: 0(wait the answer back)
: 500 ms
0 minute
: NOANSWER
: dB
: dB
[FXO-->PSTN]
[FXO-->PSTN]
[PSTN-->FXO]
[PSTN-->FXO]
[PSTN-->FXO]
[PSTN-->FXO]
[PSTN-->FXO]
[FXO-->PSTN]
[FXO-->IP]
[IP-->FXO]
[FXO-->PSTN]
[PSTN-->FXO]
[PSTN-->FXO]
[PSTN-->FXO]
[PSTN-->FXO]
[PSTN-->FXO]
[PSTN-->FXO]
[PSTN-->FXO-->IP]
[FXO-->PSTN]
[FXO<-->IP]
[FXO-->FXS]
90