Routing Table Configuration - Davolink DV-201DM User Manual

DV-201DM for H.323 & SIP

2.3.4 Routing Table Configuration

1. Command directory
DV_GW/CONFIG/ROUTE>
2. Command function
Manages route table required for call routing.
3. Available commands
Commands
Show
Add
Del
SHOW
This command is used to display numbers registered in prefix table to the console.
When add command is successfully executed, the number is added in the blank
space in the following figure. Executing "show" at "DV_GW/CONFIG/ROUTE"
prompt shows current routing table.
[Example]
DV_GW/CONFIG/ROUTE> show
====================================================================
PREFIX TABLE
====================================================================
INTF PORT NUMBERS
====================================================================
FXS 0 200
FXS 1 201
IP 0 ~
====================================================================
ADD
2 - 42
Command to show prefix table
Command to add numbers to route table required for call routing
Command to delete numbers registered in prefix table
TRNC PREFIX
0
0
0
Description
POSTFIX EXTRA_INFO
0.0.0.0
0.0.0.0
0.0.0.0