Chapter 3 — SG20T Interfaces
USB Interface
Connecting a USB Cable
18
The SG20T can be connected to a USB host using one of the USB
cables. The SG20T is USB 2.0 and operates at full speed. Power is
provided either by the host or by the external power supply connected
to the USB cable. See the
numbers for the different cables.
To connect with a USB cable
1 Connect the USB cable to your SG20T and to the host.
2 Connect the power supply to the cable and an AC power outlet if
you are using the externally powered USB cable.
"Accessories" on page 6
USB cable with power jack
SG20T Tethered Scanner User's Guide
for a list of part
Standard USB cable