Intermec SG20T1D User Manual page 24

Chapter 2 — Scanning with the SG20T
14
Scanning Bar Codes: The aiming and scanner beams that you see depend
on which SG20T model you are using.
To scan with a 2D imager
1 Point the scanner window at the bar code label and hold the
SG20T steady a few inches from the label.
2 Pull the trigger and use the laser framing or aiming beam to
position the imager over the bar code or area to capture.
20°
Example: SG20THP Laser Framing
When bar code labels are printed close to each other, try to frame or
aim only the bar code you want to read, to avoid reading the wrong bar
code.
ABCD
ABCD
30°
SG20T Tethered Scanner User's Guide