Usb Interface - Intermec SR60 Programmer's Reference Manual

Chapter 2 — Configuring Interface Settings
200 Milliseconds
500 Milliseconds
1 Second
END ------------------------------------------

USB Interface

42
---------
---------
---------
Scan the following bar codes to enable the USB interface and
configure the keyboard country code.
To enable the USB interface and configure the keyboard country code
1 Identify the keyboard country code you will use. See the
"Keyboard Country Code for USB Interface" table on
page 43.
2 Scan the START bar code on page 43.
3 Scan the Enable USB and Configure Keyboard Country
Code bar code.
4 Using the Digits bar codes on page 44, scan the digits to set
the keyboard country code you identified in Step 1.
5 Scan the END bar code on page 43.
SR60 Scanner Programmer's Reference Manual