Usb Interface; Connecting A Usb Cable - Intermec SR61XR User Manual

Chapter 3 — SR61T Interfaces

USB Interface

Connecting a USB Cable

22
The SR61T can be connected to a USB host using one of the USB
cables. The SR61T is USB 2.0 and operates at full speed. Power is
provided either by the host or by the external power supply connected
to the USB cable. See the
of part numbers for the different cables.
To connect with a USB cable
1 Turn off your host device.
2 Connect the USB cable to your SR61T and to the host.
USB cable with power jack
3 Connect the power supply to the cable and an AC power outlet if
you are using the externally powered USB cable.
"Required Accessories" on page 5
SR61T Tethered Scanner User's Guide
for a list
Standard USB cable