Intermec SG20T1D User Manual page 32

Chapter 3 — SG20T Interfaces
22
USB Virtual COM Driver
For a first time setup when using the virtual COM USB cable mode
you will need to download and install the driver. You can download
the driver from Knowledge Central on the Intermec web site.
To download the USB virtual COM driver:
1 Go to http://intermec.custhelp.com.
2 In the search box type "SG20T USB driver" and click Search.
3 Download the driver and instructions.
4 Follow the installation procedure provided in Knowledge Central.
Note: You can also install the virtual COM driver using EasySet
version 5.6.5.4 or later by selecting Virtual COM driver installation
in the Options menu.
SG20T Tethered Scanner User's Guide