Configuring Predefined Imager Modes - Intermec SG20T1D User Manual

Chapter 4 — Configuring the SG20T Scanner

Configuring Predefined Imager Modes

30
When using a 2D model (SG20THP or SG20THC), you can optimize
the reading performance of the scanner by adjusting certain
parameters. Since there are many parameters that can be adjusted, we
recommend using the pre-defined imager settings to quickly set up
your imager for optimized reading. The pre-defined imager settings
take in to account the type of bar code, environment and reading
surface.
There are 4 pre-defined imager settings:
• 1D bar codes only
Standard 1D and 2D bar codes
•
• 1D and 2D bar codes in a bright environment
• 1D and 2D bar codes with reflective surface (shiny labels and cell
phone scanning)
Select the pre-defined imager setting that best suits your needs:
1D bar codes only
Standard 1D and 2D bar codes, bright environment
Standard 1D and 2D bar codes (*)
Standard 1D and 2D bar codes, reflective surface
SG20T Tethered Scanner User's Guide