Chapter 4 — Configuring the SG20T Scanner
Offline Setup with EasySet
32
Note: The scanner does not beep when you send configuration
commands online from EasySet.
To configure your scanner offline by scanning bar codes
1 Start EasySet. The first time you start EasySet, the Select product
dialog box appears.
If the Select product dialog box does not appear, choose Product >
Select or click on the product icon in the upper left corner.
2 Select your product.
3 Open the folders to find the configuration commands needed.
Double-click each command to send each command to the setup
sheet.
4 Click on the print icon to print out the setup sheet and scan the
commands.
SG20T Tethered Scanner User's Guide